The ABS ST1300 Series is a reflective photoelectric linear encoder equipped with a two-sided telecentric imaging optical system.
The two-sided telecentric imaging optical system captures a scale grid as an image and detects its travel distance using light receiving elements. With a focal depth deeper than the conventional optical system, this system has a greater allowance for changes in the gap, such as allowance for scale undulation, stage posture change, and Detector installation. It also secures a wide imaging range, resulting in a greater allowance even for dirt and small scratches on the scale.
This product achieves the maximum effective length of 12 m, maximum response speed of 8 m/s, and minimum resolution of 0.001 µm. In addition, the following interface specifications compatible with the high-speed serial interface of the companies are available.
- Mitsubishi Electric Corporation specifications
- FANUC Corporation specifications
- Yaskawa Electric Corporation specifications
- Mitutoyo Corporation ENSIS® specifications
|
Resolution:
|
0.01 µm
|
|
Communication method:
|
Half-duplex communication: Transmision and receive lines are same
|
|
Mounting Method:
|
Double-sided tape fixing type
|
|
System parameters:
|
Available
|
|
Indicaton accuray (20° C):
|
± 5µm (up to 1 m) / ± 5µm/m (1.1 m and above)
|
|
Applicable Interfaces:
|
FANUC high-speed serial interface (α and αi interface are available)
|
|
Effective length:
|
10 mm
|
